FE1/10&100 Base-T Bridge(GP-FE1B) - Beijing GPthink Technology Co., Ltd. in ACE Suppliers B2B Marketplace

FE1/10&100 Base-T Bridge(GP-FE1B)

FE1&10/100BASE-T Interface Converter (also as FE1&10/100BASE-
T Ethernet Bridge) is an Ethernet bridge of high performance, which
accomplishes the convertering between the 100M Ethernet port and
the E1 port. As an extended device of the Ethernet, the
FE1&10/100BASE-T bridge realizes interconnection of two Ethernet
by using the E1 channel provided by existing networks with low cost.

If the FE1&10/100BASE-T bridge is used in the framing mode, the
transmission clock can be either provided internally, i.e. using the
main clocking timing mode (INT), or extracted from the E1 channel,
i.e. using slave clock timing mode.

The FE1&10/100BASE-T bridge provides plenty of self-test functions,
supporting local loop and remote loop. It also provides pseudo
random code test function to test error codes in the circuit. It is
proposed to use the products of this series in pairs.

Special Feature for Product:
1) In accordance with the provisions of IEEE 802.3, 802.3u Ethernet,
ITU-T G.703, G.704 and G.823 protocols
2) E1 interface framing/unframing optional; balanced 120ohm
3) Unbalanced 75ohm optional
4) E1 interface uses PCM31 mode, supporting CRC check
5) E1 interface main/ slave clock optional in the framing mode
6) In the E1 framing mode, the number of time slots is optional from
1 to 31
7) Supporting 2.048Mbps transparent transmission in the E1
unframing mode
8) Supports 10/100M half/ full duplex modes
9) MAC address self-learnin