SJF Series, Server Rack() - Jaunty-Fabricator Enterprise Ind. Ltd. in ACE Suppliers B2B Marketplace

SJF Series, Server Rack()

* To manufacture must follow the ANSI/ EIARS-310-C,D,E,F
criterions. UL & CE approved, and MIL-STD-167 test.
* Main Aluminum vertical rails were using the squeeze aluminum
pillars; an arc type is its appearance; material :AL6063T5
* Flexible Aluminum vertical rails can set at the rack's front & back to
meet the actual terminal wire' needs. And it at least should have 3
faces of grooves. User can see their actual situation to added the
cable fixture. Rack's external depth is 900mm, and it's internal depth
must reach 750mm.
* We have honeycomb or tempered glass door for you to choose. The
same to the Front doors . And with the hidden lock or coded lock is
optional and up to your actual need.
* 6-way Universal socket strips(1set) with switch, 50 Sets of Catch
Nut and Panel Screw are the standard outfit, also you may added the
earthling copper rails for your rack.
* Flexible aluminum vertical rail's apertures must can install the M5 or
M6 catch nuts, and aperture to aperture's distance must follow the
EIA-Rs-310C' criterions (every aperture's size cannot smaller than
9.2mm*9.2mm). And the flexible aluminum vertical rail's thickness
must higher than 2mm.
* The Removable Aluminum Vertical Rails can be adjusted its
depthforward or backward.
* As regards Catch Nuts installed in the steel rails, it can be also
adjusted its height upper or down according to the position of rack-
mount chassis.﹛
* Used the powder coating (it can against the rusty, oxidization,
scrape hurts, lacquer peeling, strong acid and alkali' erosion) for all
racks.
* If rack's width has to increase at 630 mm, the flexible aluminum
vertical rails still maintains at 19 inches.
* Rack's side panel can be easy to assemble and disassemble from
outside and without using any tools.
* 2 sets of UL & CE approved cooling fans as standard outfit. Fan's
size is 120mm*25mm. Increasing the fans' quantity is optional .
* Using the baying kits to make the steady for the rack and floor.