Series Wireless Infrared Alarm System KS-298A - Karassn Security Protection Electronics Co., Ltd. in ACE Suppliers B2B Marketplace

Series Wireless Infrared Alarm System KS-298A

Key functions:
1) Wireless detectors and remote controllers can be re-programmable.
It is easy to expand. 8 zones, each zone can be programmed 3
detectors.
2) Emergency zone, doorbell zone, At Home mode and Away Home mode can
be defined.
3) The system is compatible DTMF (Double Tone Multi Frequency) and Pulse.
It is also with dialing pause function to work over PAX. The system
can preset 5 groups telephone number, 2 groups telephone number for
managing alarm center and 1 group telephone number for power state.
Times of circularly dial can be re-programmable.
4) Built-in 20 second re-writable voice memorizer.
5) Remotely monitor on-site sound, Arm/Disarm, startup on-site alarm
sound and replay pre-record voice are available by processing alarm
phone or through dialing the telephone of alarm host.
6) Lower power indicator for detectors and main units. It also send the
telephone alarm when the detector and main unit power is in low and
the AC power is in cut-off.
7) Audit the phone line automatically, the system will send the rapidly
indicator alarm sound while the phone is cut.
8) Entry time, leaving time and alarm time can be re-programmable.
9) Compatible with the wired and the wireless.
10) The external backup rechargeable battery DC12V is available. The
system provides one group AC120V1A normal open output and one group
AC120V1A normal close output for other device. Additional, the system
provides one group external siren output.
11) Can work with managing alarm center KS-110A to carry out E-map
direction, record of Arm/Disarm, monitor, record, print alarm
record, Arm/Disarm. Additional, periodic report of power state to
manage alarm center is available.

Specifications:
1) Standard configurations: KS-998 LED-AM alarm main unit: 1
2) KS-200DCT wireless infrared detector: 1
3) KS-20AW wireless magnetic switch: 1
4) KS-10A wireless remote controller: 2
5) For home, office, store, residence use
6) Working voltage: 220V AC +/- 15%, 9.6 - 14V DC
7) Waiting current: ≤35mA
8) Dual-frequency dialing and impulse dialing
9) Wireless frequency receiver: 315MHz
10) Wireless distance receiver: ≥100m
11) Alarm voice range: ≥100dB/1m2